Show Ipv6 Snooping Features - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ipv6 snooping features

To display information about about snooping features configured on the router, use the show ipv6 snooping
features command.
show ipv6 snooping features
Syntax Description
This command has no arguments or keywords.
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
The show ipv6 snooping features command displays the first-hop features that are configured on the router.
Examples
The following example shows that both IPv6 NDP inspection and IPv6 RA guard are configured on the router:
Router# show ipv6 snooping features
Feature name
RA guard
NDP inspection
The table below describes the significant fields shown in the display.
Table 6: show ipv6 snooping features Field Descriptions
Field
Feature name
priority
state
Modification
This command was introduced.
priority state
100 READY
20 READY
show ipv6 snooping features
Description
The names of the IPv6 global policy features
configured on the router.
The priority of the specified feature.
The state of the specified feature.
Cisco Nexus 7000 Series Security Command Reference
825