Feature Ldap - Cisco Nexus 7000 Series Command Reference Manual

F Commands

feature ldap

To enable Lightweight Directory Access Protocol (LDAP), use the feature ldap command. To disable LDAP,
use the no form of this command.
feature ldap
no feature ldap
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
5.0(2)
Usage Guidelines
You must use the feature ldap command before you configure LDAP.
When you disable LDAP, the Cisco NX-OS software removes the LDAP configuration.
Note
This command does not require a license.
Examples This example shows how to enable LDAP:
switch# configure terminal
switch(config)# feature ldap
This example shows how to disable LDAP:
switch# configure terminal
switch(config)# no feature ldap
Related Commands
Command
show running-config ldap
show startup-config ldap
Modification
This command was introduced.
Description
Displays the LDAP configuration in the running
configuration.
Displays the LDAP configuration in the startup
configuration.
Cisco Nexus 7000 Series Security Command Reference
feature ldap
323