Cisco Nexus 7000 Series Command Reference Manual page 558

periodic
time
to
list-of-weekdays
Command Default
to
Command Modes
Time-range configuration
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to create a time range named weekend-remote-access-times and configure a periodic
rule that allows traffic between 4:00 a.m. and 10:00 p.m. on Saturday and Sunday:
switch# configure terminal
switch(config)# time-range weekend-remote-access-times
switch(config-time-range)# periodic weekend 04:00:00 to 22:00:00
Cisco Nexus 7000 Series Security Command Reference
532
Time of day that the range starts or ends. The first
occurrence of this argument is the time that the range
begins. The second occurrence of this argument is
the time that the range ends.
You can specify the time argument in 24-hour
notation, in the format hours:minutes or
hours:minutes:seconds. For example, 8:00 a.m. is
8:00 and 8:00 p.m. is 20:00.
Separates the first and second occurrences of the time
argument.
(Optional) Days that the range is in effect. Valid
values of this argument are as follows:
• A space-delimited list of weekdays, such as the
following:
monday thursday friday
• daily—All days of the week.
• weekdays—Monday through Friday.
• weekend—Saturday through Sunday.
Modification
This command was introduced.
P Commands