Show Ldap-Server - Cisco Nexus 7000 Series Command Reference Manual

show ldap-server

show ldap-server
To display the Lightweight Directory Access Protocol (LDAP) server configuration, use the show ldap-server
command.
show ldap-server
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples This example shows how to display the LDAP server configuration:
switch# show ldap-server
timeout : 5
total number of servers : 0
Related Commands
Command
feature ldap
ldap-server host
Cisco Nexus 7000 Series Security Command Reference
832
port : 389
deadtime : 0
Modification
This command was introduced.
Description
Enables LDAP.
Specifies the IPv4 or IPv6 address or hostname for
an LDAP server.
Show Commands