Macsec Policy - Cisco Nexus 7000 Series Command Reference Manual

macsec policy

macsec policy
To configure a MACsec policy, use the macsec policy policy-name command. To disable the policy, use the
no form of this command.
macsec policy policy-name
no macsec policy policy-name
Syntax Description
policy-name
Command Default
The system-default-macsec-policy default policy is used.
Command Modes
Global configuration (config)
Command History
Release
8.2(1)
Usage Guidelines
To use this command, you should enable the MKA feature first.
Examples This example shows how to configure a MACsec policy:
switch# configure terminal
switch(config)# macsec policy p1
Related Commands
Command
feature mka
key
key chain keychain-name
macsec keychain policy
show key chain
Cisco Nexus 7000 Series Security Command Reference
502
Specifies the policy name. It can be alphanumeric.
Modification
This command was introduced.
Description
Enables the MKA feature.
Creates a key or enters the configuration mode of an
existing key.
Creates a keychain or enters the configuration mode
of an existing keychain.
Configures the MACsec keychain policy.
Displays the configuration of the specified keychain.
M Commands