Accept-Lifetime - Cisco Nexus 7000 Series Command Reference Manual

A Commands

accept-lifetime

To specify the time interval within which the device accepts a key during a key exchange with another device,
use the accept-lifetime command. To remove the time interval, use the no form of this command.
accept-lifetime [local] start-time [duration duration-value| infinite| end-time]
no accept-lifetime [local] start-time [duration duration-value| infinite| end-time]
Syntax Description
local
start-time
duration duration-value
infinite
end-time
Command Default
infinite
Command Modes
Key configuration
Command History
Release
4.0(1)
Usage Guidelines
By default, the device interprets all time range rules as UTC.
(Optional) Specifies that the device treats the
configured times as local times. By default, the device
treats the start-time and end-time arguments as UTC.
Time of day and date that the device begins accepting
the key.
For information about the values for the start-time
argument, see the "Usage Guidelines" section.
(Optional) Specifies the length of the lifetime in
seconds. The maximum length is 2147483646 seconds
(approximately 68 years).
(Optional) Specifies that the key never expires.
(Optional) Time of day and date that the device stops
accepting the key.
For information about the values for the time of day
and date arguments, see the "Usage Guidelines"
section.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
accept-lifetime
5