Converting The Program; Saving The Project; Writing Data To The Programmable Controller - Mitsubishi Electric MELSEC iQ-R Series User Manual

4.10

Converting the Program

Determine the input ladder blocks.
Procedure
1.
Select [Convert]  [Convert] on the menu bar.
2.
When the conversion processing completes and the input ladder blocks are determined, the color of those ladder blocks
changes from gray to white.
4.11

Saving the Project

Save the created project.
[Project]  [Save as]
4.12

Writing Data to the Programmable Controller

Write the set parameters and the created program to the CPU module.
[Online]  [Write to PLC]
Procedure
• For the operation of the CPU module, the system parameter file, CPU parameter file, and program file must
be written. For the operation of the I/O modules and intelligent function modules, the module parameter files
and module extension parameter file must be written as well.
• When a parameter setting is changed, reset the CPU module. ( Page 51 Resetting the CPU Module)
• Use of the [Select Favorites] button enables users to easily select frequently-used files, such as the system
parameter file, CPU parameter file, and program file. Register items as favorites on the window opened by
selecting [Setting]  [Register Favorites Selection] on the menu bar.
4 START-UP PROCEDURE
50
4.10 Converting the Program
1.
Select the system parameter file, CPU parameter file, module
parameter file, and program file on the "Online Data Operation"
window. If any function block is used, select the corresponding
FB/FUN file as well.
2.
Click the [Execute] button.
3.
After the write processing completes, click the [Close] button.