Writing Data To The Cpu Module; Resetting The Cpu Module; Executing The Program - Mitsubishi Electric MELSEC iQ-F Series Training Manual

Writing Data to the CPU Module

Write the set parameters and the created program to the CPU module.
[Online]  [Write to PLC]
• For the operation of the CPU module, the system parameter file, CPU parameter file, and program file must
be written. For the operation of the expansion adapter, I/O modules and intelligent function modules, the
module parameter files must be written as well.

Resetting the CPU Module

Reset the CPU module using the RUN/STOP/RESET switch located on the front of the CPU module.
(1)
Operate the RUN/STOP/RESET switch with your fingers. Use of a tool such as a screwdriver may damage
the switch.

Executing the Program

Execute the program written to the programmable controller by using the RUN/STOP/RESET switch.
(1)
1.
Select the system parameter file, CPU parameter file, module
parameter file, and program file on the "Online Data Operation"
window.
2.
Click the [Execute] button.
3.
After the write processing completes, click the [Close] button.
1.
Set the RUN/STOP/RESET switch (1) to the RESET position for a
second or longer.
2.
Check that the ERROR LED (2) flashes for several times and turns off.
3.
Set the switch back to the STOP position.
(2)
1.
Set the RUN/STOP/RESET switch (1) to the RUN position.
2.
Check that the P.RUN (2) turns on.
(2)
29