BIOS Setup Utility Menu Options
This section describes the Basic Input/Output System (BIOS) Setup Utility.
Note -
Guide
Description
BIOS basics and screens
BIOS screens
POST codes
About the BIOS Setup Utility
The server's Basic Input/Output System (BIOS) is stored on the motherboard and managed
using the BIOS setup utility. The utility reports system information and provides a graphical
user interface that allows you to change the server BIOS settings from the factory-configured
defaults.
The BIOS has two operational boot modes, Legacy and UEFI. Changing modes changes the
content of some utility screens. The legacy boot mode is the default mode.
For a listing of the BIOS Setup Utility menus, see
Screens" on page
BIOS Setup Utility Screens
This section contains screen captures of the higher-level BIOS Setup Utility menus.
"Legacy Mode BIOS Setup Utility Screens" on page 240
■
"UEFI Mode BIOS Setup Utility Screens" on page 269
■
For more information about BIOS, refer to
Link
"About the BIOS Setup Utility" on page 239
"Access the BIOS Setup Utility" on page 269
"POST and Checkpoint Codes"
240.
Oracle X4 Series Servers Administration
"Legacy Mode BIOS Setup Utility
BIOS Setup Utility Menu Options
239