Display Nqa Statistics - HP MSR1003-8S Command Reference Manual

Field
Jitter number
Min/Max/Average jitter
Positive jitter number
Min/Max/Average positive jitter
Sum/Square-Sum positive jitter
Negative jitter number
Min/Max/Average negative jitter
Sum/Square-Sum negative jitter
TTL
Hop IP
Time

display nqa statistics

Use display nqa statistics to display NQA operation statistics.
Syntax
display nqa statistics [ admin-name operation-tag ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
admin-name operation-tag: Specifies an NQA operation by its administrator name and operation tag.
The admin-name argument represents the name of the administrator who creates the NQA operation.
The operation-tag argument represents the operation tag. Each of the arguments is a case-insensitive
string of 1 to 32 characters that cannot contain hyphens (-). If you do not specify an NQA operation, the
command displays statistics for all NQA operations.
Description
Number of jitters.
This field is available only for the path jitter operation.
Minimum/maximum/average jitter in milliseconds.
This field is available only for the path jitter operation.
Number of positive jitter.
This field is available only for the path jitter operation.
Minimum/maximum/average positive jitter in milliseconds.
This field is available only for the path jitter operation.
Sum/square sum of the positive jitter.
This field is available only for the path jitter operation.
Number of negative jitter.
This field is available only for the path jitter operation.
Minimum/maximum/average negative jitter in milliseconds.
This field is available only for the path jitter operation.
Sum/square sum of the negative jitter.
This field is available only for the path jitter operation.
TTL value in the received reply packet.
IP address of the node that sent the reply packet.
Time when the NQA client received the reply packet.
28