Viewing Appletalk Statistics - Avaya Cajun P550R User Manual

Chapter 15
Adding or
Deleting
Interfaces to a
Zone Filter
Using the CLI

Viewing AppleTalk Statistics

15-22
To add interfaces to a zone filter using the CLI, enter the following
command from Configure mode:
> (config-if <interface-name>:)# appletalk
access-list <access-list-number>
<permit|deny> zone <string>
To delete interfaces to an zone filter, enter the following command
from Configure mode:
> (config-if <interface-name>:)# no appletalk
access-list <access-list-number> <permit|deny>
zone <string>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about these commands.
This section includes:
Viewing AppleTalk Global Statistics
Viewing the AppleTalk Interface Statistics Table
Viewing the AppleTalk Interface Statistics Table Using the CLI
Viewing AppleTalk Route Table Statistics
Viewing the AppleTalk ARP Cache Table
Viewing the AppleTalk Zone Table
Viewing AppleTalk Zone Table Statistics
Viewing the AppleTalk NBP Table
Cajun P550/P880/P882 Switch Configuration Guide