Viewing Appletalk Statistics - Avaya 580 User Manual

Chapter 19
CLI Commands

Viewing AppleTalk Statistics

19-22
4. Click:
Add to add this zone filter to the selected interface.
—
DELETE to remove this zone filter from the selected interface.
—
CANCEL to restore previous settings.
—
To add interfaces to a zone filter using the CLI, enter the following
command from Interface mode:
(config-if:<interface-name>)# appletalk access-list <access-
list-number> {permit | deny} zone <string>
To delete interfaces to an zone filter, enter the following command from
Interface mode:
(config-if:<interface-name>)# no appletalk access-list
<access-list-number> {permit | deny} zone <string>
This section includes:
Viewing AppleTalk Global Statistics
Viewing the AppleTalk Interface Statistics Table
Viewing the AppleTalk Route Table
Viewing AppleTalk Route Table Statistics
Viewing the AppleTalk ARP Cache Table
Viewing the AppleTalk Zone Table
Viewing AppleTalk Zone Table Statistics
Viewing the AppleTalk NBP Table
User Guide for the Avaya P580 and P882 Multiservice Switches, v6.1