Display Bgp Peer Received Ip-Prefix - HP FlexNetwork 3600 v2 Series Command Reference Manual

Field

display bgp peer received ip-prefix

Syntax
display bgp peer ip-address received ip-prefix [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
ip-address: IP address of a BGP peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp peer received ip-prefix to display the prefix information in the ORF packet from
the specified BGP peer.
Examples
# Display the prefix information in the ORF packet from the BGP peer 10.110.25.20.
<Sysname> display bgp peer 10.110.25.20 received ip-prefix
ORF ip-prefix entries: 2
ge: greater-equal
index rule
10 permit 111.111.111.0/24
20 deny
Table 47 Command output
Field
ORF ip-prefix entries
index
rule
prefix
ge
le
le: less-equal
prefix
2.1.1.0/24
Description
Notification, which identifies the specific
information about the reported error.
ge le
26 32
26 32
Description
Number of ORF prefix entries
Index of a prefix entry
Matching rule of the prefix
Prefix information
greater-equal, indicating the mask length must be
greater than or equal to the specific value.
less-equal, indicating the mask length must be less
than or equal to the specific value.
205