Flash-Flood; Graceful-Restart (Is-Is View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname] isis 1
[Sysname-isis 1] filter-policy 3000 import

flash-flood

Syntax
flash-flood [ flood-count flooding-count | max-timer-interval flooding-interval | [ level-1 | level-2 ] ]
*
undo flash-flood [ level-1 | level-2 ]
View
IS-IS view
Default level
2: System level
Parameters
flood-count flooding-count: Specifies the maximum number of LSPs to be flooded before the next
SPF calculation, ranging from 1 to 15. The default is 5.
max-timer-interval flooding-interval: Specifies the delay (in milliseconds) of the flash flooding,
ranging from 10 to 50000. The default is 10.
level-1: Enables flash flooding for level-1.
level-2: Enables flash flooding for level-2.
Description
Use flash-flood to enable IS-IS LSP flash flooding.
Use undo flash-flood to disable IS-IS LSP flash flooding.
IS-IS LSP flash flooding is disabled by default.
If no level is specified, the command enables IS-IS LSP flash flooding for both Level-1 and Level-2.
Examples
# Enable fast flooding and specify the maximum LSPs to be sent as 10 and the delay time as 100
milliseconds.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] flash-flood flood-count 10 max-timer-interval 100

graceful-restart (IS-IS view)

Syntax
graceful-restart
undo graceful-restart
View
IS-IS view
Default level
2: System level
154