Isis Enable; Isis Mib-Binding - HP FlexNetwork 3600 v2 Series Command Reference Manual

isis enable

Syntax
isis enable [ process-id ]
undo isis enable
View
Interface view
Default level
2: System level
Parameters
process-id: Specifies a IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use isis enable to enable an IS-IS process on the interface.
Use undo isis enable to disable IS-IS.
No IS-IS routing process is enabled on an interface by default.
Related commands: isis, network-entity.
Examples
# Create IS-IS routing process 1, and enable the IS-IS routing process on VLAN-interface 10.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] isis enable 1

isis mib-binding

Syntax
isis mib-binding process-id
undo isis mib-binding
View
System view
Default level
2: System level
Parameters
process-id: IS-IS process ID, in the range of 1 to 65535.
Description
Use isis mib-binding to bind MIBs with an IS-IS process.
Use undo isis mib-binding to restore the default.
By default, MIBs are bound with IS-IS process 1.
165