Maximum Load-Balancing (Ospfv3 View); Ospfv3 - HP FlexNetwork 3600 v2 Series Command Reference Manual

[Sysname] ospfv3 100
[Sysname-ospfv3-100] undo log-peer-change

maximum load-balancing (OSPFv3 view)

Syntax
maximum load-balancing maximum
undo maximum load-balancing
View
OSPFv3 view
Default level
2: System level
Parameters
maximum: Maximum number of ECMP routes , in the range of 1 to 8.
Description
Use maximum load-balancing to configure the maximum number of ECMP routes.
Use undo maximum load-balancing to restore the default.
By default, the maximum number of ECMP routes is 8.
Examples
# Configure the maximum number of ECMP routes as 6.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] maximum load-balancing 6

ospfv3

Syntax
ospfv3 [ process-id ] [ vpn-instance vpn-instance-name ]
undo ospfv3 [ process-id ]
View
System view
Default level
2: System level
Parameters
process-id: OSPFv3 process ID, ranging from 1 to 65535. The process ID defaults to 1.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, the OSPFv3 process belongs to
the public network.
Description
Use ospfv3 to enable an OSPFv3 process and enter OSPFv3 view.
Use undo ospfv3 to disable an OSPFv3 process.
The system runs no OSPFv3 process by default.
316