Filter-Policy Export - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
2: System level
Parameters
route-policy: Name of an export routing policy, a case-sensitive string of 1 to 63 characters.
Description
Use export route-policy to apply an export routing policy to a VPN instance, an IPv4 VPN, or an
IPv6 VPN.
Use undo export route-policy to remove the application.
By default, no policy is applied to filter the routes to be advertised.
You can specify an export routing policy when the VPN route advertisement control provided by the
extended community attributes is not enough.
An export routing policy specified in VPN instance view applies to both the IPv4 VPN and the IPv6
VPN.
An export routing policy specified in IPv6 VPN view applies to only the IPv6 VPN.
An export routing policy specified in IPv6 VPN view takes precedence over that specified in VPN
instance view. If you specify an export routing policy in IPv6 VPN view and VPN instance view, the
IPv6 VPN uses the policy specified in IPv6 VPN view.
Examples
# Apply export routing policy poly-1 to VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] export route-policy poly-1
# Apply export routing policy poly-3 to the IPv6 VPN of VPN instance vpn3.
<Sysname> system-view
[Sysname] ip vpn-instance vpn3
[Sysname-vpn-instance-vpn3] ipv6-family
[Sysname-vpn-ipv6-vpn3] export route-policy poly-3

filter-policy export

Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } export [ direct | isisv6 process-id |
ospfv3 process-id | ripng process-id | static ]
undo filter-policy export [ direct | isisv6 process-id | ospfv3 process-id | ripng process-id | static ]
View
IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
acl6-number: Specifies an IPv6 ACL number, in the range of 2000 to 3999.
ipv6-prefix ipv6-prefix-name: Specifies an IPv6 address prefix list by its name, a string of 1 to 19
characters.
direct: Filters direct routes to be advertised.
480