Peer Ipv6-Prefix - HP FlexNetwork 3600 v2 Series Command Reference Manual

Parameters
ipv6-group-name: Name of a peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of a peer.
Description
Use peer ignore to terminate the session to a peer or peer group.
Use undo peer ignore to remove the configuration.
By default, a router can establish sessions with a peer or peer group.
After the peer ignore command is executed, the system terminates the active session(s) with the
specified peer or peer group and clears all the related routing information. For a peer group, all the
sessions with the peer group will be torn down.
Examples
# Terminate the session with peer 1:2::3:4.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 ignore

peer ipv6-prefix

Syntax
peer { group-name | ipv4-address | ipv6-address } ipv6-prefix ipv6-prefix-name { import | export }
undo peer { group-name | ipv4-address | ipv6-address } ipv6-prefix { import | export }
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer.
ipv6-address: IPv6 address of a peer.
ipv6-prefix-name: IPv6 prefix list name, a string of 1 to 19 characters.
import: Applies the filtering policy to routes received from the specified peer/peer group.
export: Applies the filtering policy to routes advertised to the specified peer/peer group.
Description
Use peer ipv6-prefix to specify an IPv6 prefix list to filter routes incoming from or outgoing to a peer
or peer group.
Use undo peer ipv6-prefix to remove the configuration.
By default, no IPv6 prefix list is specified for filtering.
Examples
# Reference the IPv6 prefix list list 1 to filter routes outgoing to peer 1:2::3:4.
<Sysname> system-view
[Sysname] ip ipv6-prefix list1 permit 2002:: 64
390