Area (Ospf View); Asbr-Summary - HP FlexNetwork 3600 v2 Series Command Reference Manual

area (OSPF view)

Syntax
area area-id
undo area area-id
View
OSPF view
Default level
2: System level
Parameters
area-id: ID of an area, which is an IP address, or a decimal integer in the range of 0 to 4294967295
that is translated into the IP address format by the system.
Description
Use area to create an area and enter area view.
Use undo area to remove an area.
No OSPF area is created by default.
Examples
# Create area 0 and enter area 0 view
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0]

asbr-summary

Syntax
asbr-summary ip-address { mask | mask-length } [ cost cost | not-advertise | tag tag ] *
undo asbr-summary ip-address { mask | mask-length }
View
OSPF view
Default level
2: System level
Parameters
ip-address: IP address of the summary route in dotted decimal notation.
mask: Summary route mask, in dotted decimal notation.
mask-length: Length of summary route mask, in the range of 0 to 32 bits.
cost cost: Specifies the cost of the summary route, in the range of 1 to 16777214. For Type-1
external routes, the cost defaults to the largest cost among routes that are summarized. For Type-2
external routes, the cost defaults to the largest cost among routes that are summarized plus 1.
not-advertise: Disables advertising the summary route. If the keyword is not specified, the route is
advertised.
60