Ipv6 Static Routing Configuration Commands; Delete Ipv6 Static-Routes All; Ipv6 Route-Static - HP FlexNetwork 3600 v2 Series Command Reference Manual

IPv6 static routing configuration
commands
The term "router" in this chapter refers to both routers and Layer 3 switches.

delete ipv6 static-routes all

Syntax
delete ipv6 [ vpn-instance vpn-instance-name ] static-routes all
View
System view
Default level
2: System level
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, all static routes of the public
network are deleted.
Description
Use delete ipv6 static-routes all to delete all static routes including the default route.
When using this command, you will be prompted whether to continue the deletion and only after you
confirm the deletion will the static routes be deleted.
Related commands: ipv6 route-static and display ipv6 routing-table.
Examples
# Delete all IPv6 static routes.
<Sysname> system-view
[Sysname] delete ipv6 static-routes all
This will erase all ipv6 static routes and their configurations, you must reconfigure all
static routes
Are you sure?[Y/N]Y

ipv6 route-static

Syntax
ipv6 route-static ipv6-address prefix-length { interface-type interface-number [ next-hop-address ] |
next-hop-address | vpn-instance d-vpn-instance-name nexthop-address } [ preference
preference-value ] [ tag tag-value ] [ description description-text ]
undo ipv6
[ next-hop-address ] | next-hop-address | vpn-instance d-vpn-instance-name nexthop-address ]
[ preference preference-value ]
ipv6 route-static
{ interface-type interface-number [ next-hop-address ] | nexthop-address [ public ] | vpn-instance
d-vpn-instance-name nexthop-address } [ preference preference-value ] [ tag tag-value ]
[ description description-text ]
route-static ipv6-address
vpn-instance
prefix-length
s-vpn-instance-name&<1-6>
263
[
interface-type interface-number
ipv6-address prefix-length