HP FlexNetwork 3600 v2 Series Command Reference Manual page 311

|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospfv3 peer to display OSPFv3 neighbor information.
•
If no area-id is specified, the neighbor information of all areas is displayed.
•
If no process-id is specified, the information of all processes is displayed.
•
If no interface or neighbor Router-ID is specified, the neighbor information of all interfaces is
displayed.
Examples
# Display the neighbor information of OSPFv3 process 1 on an interface.
<Sysname> display ospfv3 1 peer vlan-interface 10
Neighbor ID
1.1.1.1
Table 66 Command output
Field
Neighbor ID
Pri
State
Dead Time
Interface
Instance ID
# Display detailed neighbor information of OSPFv3 process 100 of an interface.
<Sysname> display ospfv3 1 peer vlan-interface 33 verbose
Neighbor 1.1.1.1 is Full, interface address FE80::20F:E2FF:FE49:8050
In the area 0.0.0.1 via interface Vlan-interface33
DR is 1.1.1.1 BDR is 2.2.2.2
Options is 0x000013 (-|R|-|-|E|V6)
Dead timer due in 00:00:39
Neighbor is up for 00:25:31
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Graceful restart state: Normal
OSPFv3 Process (1)
Pri State
1 Full/ -
OSPFv3 Process (1)
Dead Time Interface
00:00:30 vlan10
Description
Router ID of a neighbor
Priority of neighbor router
Neighbor state
Dead time remained
Interface connected to the neighbor
Instance ID
299
Instance ID
0