Isis Ipv6 Enable - HP FlexNetwork 3600 v2 Series Command Reference Manual

View
Interface view
Default level
2: System level
Parameters
None
Description
Use isis ipv6 bfd enable to enable BFD on an IPv6 IS-IS interface for link failure detection.
Use undo isis ipv6 bfd enable to disable BFD on an IPv6 IS-IS interface.
By default, an IPv6 IS-IS interface is not enabled with BFD.
Examples
# Enable BFD for IPv6 IS-IS on VLAN-interface 11.
<Sysname> system-view
[Sysname] interface vlan-interface 11
[Sysname-Vlan-interface11] isis ipv6 bfd enable

isis ipv6 enable

Syntax
isis ipv6 enable [ process-id ]
undo isis ipv6 enable
View
Interface view
Default level
2: System level
Parameters
process-id: IS-IS process ID, ranging from 1 to 65535. The default is 1.
Description
Use isis ipv6 enable to enable IPv6 for the specified IS-IS process on the interface.
Use undo isis ipv6 enable to disable the configuration.
IPv6 is disabled on the interface by default.
Examples
# Enable global IPv6, create IS-IS routing process 1, enable IPv6 for the process, and enable IPv6
for the process on VLAN-interface 100.
<Sysname> system-view
[Sysname] ipv6
[Sysname] isis 1
[Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00
[Sysname-isis-1] ipv6 enable
[Sysname-isis-1] quit
[Sysname] interface vlan-interface 100
[Sysname--Vlan-interface100] ipv6 address 2002::1/64
341