Description (Ospf/Ospf Area View); Display Ospf Abr-Asbr - HP FlexNetwork 3600 v2 Series Command Reference Manual

Examples
# Generate a default route in an ASE LSA into the OSPF routing domain, regardless of whether the
default route is available in the routing table.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] default-route-advertise always

description (OSPF/OSPF area view)

Syntax
description description
undo description
View
OSPF view/OSPF area view
Default level
2: System level
Parameters
description: Configures a description for the OSPF process in OSPF view, or for the OSPF area in
OSPF area view. description is a string of up to 80 characters.
Description
Use description to configure a description for an OSPF process or area.
Use undo description to remove the description.
No description is configured by default.
Use of this command is only for the identification of an OSPF process or area. The description has
no special meaning.
Examples
# Describe OSPF process 100 as abc.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] description abc
# Describe OSPF area 0 as bone area.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] area 0
[Sysname-ospf-100-area-0.0.0.0] description bone area

display ospf abr-asbr

Syntax
display ospf [ process-id ] abr-asbr [ | { begin | exclude | include } regular-expression ]
View
Any view
65