If-Match Ipv6 - HP 6125XLG Command Reference Manual

Blade switch layer 3 - ip routing
Table of Contents

Advertisement

Table 102 Command output
Field
Prefix-list6
Permitted
Denied
index
permit
6::/64
ge
le
Related commands
ipv6 prefix-list
reset ipv6 prefix-list

if-match ipv6

Use if-match ipv6 to match IPv6 routes whose destination, next hop, or source matches the specified IPv6
prefix list.
Use undo if-match ipv6 to remove the configuration.
Syntax
if-match ipv6 { address | next-hop | route-source } { acl acl6-number | prefix-list prefix-list-name
undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ]
Default
No IPv6 prefix list match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
address: Matches the destination address of IPv6 routing information.
next-hop: Matches the next hop of IPv6 routing information.
route-source: Matches the source address of IPv6 routing information.
acl acl6-number: Specifies an IPv6 ACL for filtering by its number in the range of 2000 to 3999 for
address, and 2000 to 2999 for next-hop and route-source.
prefix-list prefix-list-name: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to 63
characters.
Description
Name of the IPv6 prefix list.
Number of routes satisfying the match criterion.
Number of routes not satisfying the match criterion.
Index number of an item.
Match mode of the item:
permit.
deny.
IPv6 address and prefix length for matching.
Greater-equal, the lower prefix length.
Less-equal, the upper prefix length.
444

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents