Display Ospf Peer - HP FlexNetwork 3600 v2 Series Command Reference Manual

Default level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display ospf nexthop to display OSPF next hop information.
If no OSPF process is specified, the next hop information of all OSPF processes is displayed.
Examples
# Display OSPF next hop information.
<Sysname> display ospf nexthop
OSPF Process 1 with Router ID 192.168.0.1
Next Hops:
Address
----------------------------------------------------------------
192.168.0.1
192.168.0.2
192.168.1.1
Table 20 Command output
Field
Next Hops
Address
Refcount
IntfAddr
Intf Name

display ospf peer

Syntax
display ospf [ process-id ] peer [ verbose ] [ interface-type interface-number ] [ neighbor-id ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Routing Nexthop Information
Refcount IntfAddr
1 192.168.0.1
1 192.168.0.1
1 192.168.1.1
Description
Information about Next hops
Next hop address
Reference count (routes that reference the next hop)
Outbound interface address
Outbound interface name
Intf Name
Vlan-interface11
Vlan-interface11
Vlan-interface12
79