HP FlexNetwork 3600 v2 Series Command Reference Manual page 486

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

Table 110 Command output
Field
BGP local router ID
Peer
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
# Display detailed information about the IPv6 BGP peers in the VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 peer verbose
BGP Peer is 2001::1,
Type: EBGP link
BGP version 4, remote router ID 2.2.2.2
BGP current state: Established, Up for 00h00m54s
BGP current event: RecvUpdate
BGP last state: OpenConfirm
Port:
Local - 179
Configured: Active Hold Time: 180 sec
Received
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv6 Unicast: advertised and received
Received: Total 4 messages, Update messages 2
Sent: Total 6 messages, Update messages 3
Maximum allowed prefix number: 4294967295
Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 111 Command output
Field
BGP Peer
Description
Router ID of the local BGP router
IPv6 address of the peer
AS number of the peer
Number of messages received
Number of messages sent
Number of messages to be sent to the peer
Number of prefixes received
Duration of the BGP session in the current state
Current state of the peer
remote AS 200,
Remote - 1024
: Active Hold Time: 180 sec
Description
IPv6 address of the BGP peer
474
Keepalive Time: 60 sec
Keepalive Time:60 sec

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents