HP FlexNetwork 3600 v2 Series Command Reference Manual page 82

Field
LSA generation interval
LSA arrival interval
Transmit pacing
Default ASE Parameter
Route Preference
ASE Route Preference
SPF Computation count
RFC1583 Compatible
Area Count
Nssa Area Count
7/5 translator state
7/5 translate stability timer interval
ExChange/Loading Neighbors
Area
Authtype
Area flag
SPF scheduled Count
Interface
Cost
State
Type
MTU
Priority
Designated Router
Backup Designated Router
Timers
Description
LSA generation interval.
LSA arrival interval.
LSU packet transmit rate of the interface:
•
Interval—Indicates the LSU transmit interval of the
interface.
•
Count—Indicates the maximum number of LSU packets
sent at each interval.
Default ASE Parameters: metric, tag, route type.
Internal route priority.
External route priority.
SPF computation count of the OSPF process.
Compatible with routing rules defined in RFC 1583.
Area number of the current process.
NSSA area number of the current process.
State of the translator that translates Type-7 LSAs to Type-5
LSAs. The value can be one of the following:
•
Enabled—Indicates the translator is specified through
commands.
•
Elected—Indicates the translator is designated through
election.
•
Disabled—Indicates the device is not a translator that
translates Type-7 LSAs to Type-5 LSAs.
Stability interval for Type-7 LSA-to-Type-5 LSA translation.
Neighbors in ExChange/Loading state.
Area ID in the IP address format .
Authentication type of the area:
•
None—No authentication.
•
Simple—Simple authentication.
•
MD5—MD5 authentication.
The type of the area.
SPF calculation count in the OSPF area.
Interface in the area.
Interface cost.
Interface state.
Interface network type.
Interface MTU.
Router priority.
The Designated Router.
The Backup Designated Router.
Intervals of timers: hello, dead, poll, retransmit, and transmit
delay.
70