HP FlexNetwork 3600 v2 Series Command Reference Manual page 148

BFD
Table 31 Command output
Field
Interface
Id
IPV4.State
IPV6.State
MTU
Type
DIS
SNPA Address
IP Address
Secondary IP Address(es)
IPV6 Link Local Address
IPV6 Global Address(es)
Csnp Timer Value
Hello Timer Value
Hello Multiplier Value
Lsp Timer Value
Lsp Transmit-Throttle Count
Cost
Priority
Retransmit Timer Value
BFD
# Display IS-IS interface statistics.
<sysname> display isis interface statistics
Interface Statistics information for ISIS(1)
--------------------------------------------
Type IPv4 Up/Down
LAN
P2P
Table 32 Command output
Field
Type
IPv4 UP
IPv4 DOWN
IPv6 UP
: Disabled
Description
Interface type and number
Circuit ID
IPv4 state
IPv6 state
Interface MTU
Interface link adjacency type
Whether the interface is elected as the DIS or not
Subnet access point address
Primary IP address
Secondary IP addresses
IPv6 link local address
IPv6 global address
Interval for sending CSNP packets
Interval for sending Hello packets
Number of invalid Hello packets
Minimum interval for sending LSP packets
Number of LSP packets sent each time
Cost of the interface
DIS priority
LSP retransmission interval over the point-to-point link
Whether BFD is enabled on the interface
IPv6 Up/Down
0/1
4/0
Description
Network type of the interface:
•
•
Number of IS-IS interfaces in up state.
Number of IS-IS interfaces in down state.
Number of IS-ISv6 interfaces in up state. If IPv6 is not
136
-/-
-/-
LAN for broadcast network.
P2P for point-to-point network.