Domain-Authentication-Mode; Fast-Reroute - HP FlexNetwork 3600 v2 Series Command Reference Manual

domain-authentication-mode

Syntax
domain-authentication-mode { md5 | simple } [ cipher ] password [ ip | osi ]
undo domain-authentication-mode
View
IS-IS view
Default level
2: System level
Parameters
md5: Specifies the MD5 authentication mode.
simple: Specifies the simple authentication mode.
cipher: Sets a ciphertext password. If this keyword is not specified, you set a plaintext password.
password: Sets the password. This argument is case sensitive. It must be a plaintext string of 1 to 16
characters, or a ciphertext string of 33 to 53 characters.
ip: Checks IP related fields in LSPs.
osi: Checks OSI related fields in LSPs.
NOTE:
Whether a password should use ip or osi is not affected by the actual network environment.
Description
Use domain-authentication-mode to specify the routing domain authentication mode and a
password.
Use undo domain-authentication-mode to restore the default.
No routing domain authentication is configured by default
The configured password in the specified mode is inserted into all outgoing Level-2 packets (LSP,
CSNP and PSNP) and is used for authenticating the incoming Level-2 packets.
All the backbone routers must have the same authentication mode and password.
If neither ip nor osi is specified, the OSI related fields in LSPs are checked.
Related commands: area-authentication-mode and isis authentication-mode.
Examples
# Specify the routing domain authentication mode as simple, and set the plaintext password to
123456.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] domain-authentication-mode simple 123456

fast-reroute

Syntax
fast-reroute { auto | route-policy route-policy-name }
undo fast-reroute
150