Ipv6 Filter-Policy Import - HP FlexNetwork 3600 v2 Series Command Reference Manual

•
If no protocol is specified, routes redistributed from all protocols are filtered before
advertisement.
•
If a protocol is specified, only routes redistributed from the protocol are filtered before
advertisement.
If you want to reference an advanced ACL (with a number from 3000 to 3999) in the command or in
the routing policy, the ACL should be configured with the rule [ rule-id ] { deny | permit } ipv6 source
sour sour-prefix command to deny/permit a route with the specified destination, or with the rule
[ rule-id ] { deny | permit } ipv6 source sour sour-prefix destination dest dest-prefix command to
deny/permit a route with the specified destination and prefix. The source keyword specifies the
destination address of a route and the destination keyword specifies the prefix of the route (the
prefix must be valid; otherwise, the configuration is ineffective).
Related commands: ipv6 filter-policy import.
Examples
# Reference the ACL6 2006 to filter all the redistributed routes.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 2006 export
# Configure ACL6 3000 to permit only route 2001::1/128 to pass, and reference ACL6 3000 to filter
redistributed routes.
<Sysname> system-view
[Sysname] acl ipv6 number 3000
[Sysname-acl6-adv-3000] rule 10 permit ipv6 source 2001::1 128 destination
ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff 128
[Sysname-acl6-adv-3000] rule 100 deny ipv6
[Sysname-acl6-adv-3000] quit
[Sysname] isis 1
[Sysname-isis-1] ipv6 filter-policy 3000 export

ipv6 filter-policy import

Syntax
ipv6 filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name | route-policy route-policy-name }
import
undo ipv6 filter-policy import
View
IS-IS view
Default level
2: System level
Parameters
acl6-number: Number of a basic or advanced IPv6 ACL used to filter incoming routes, ranging from
2000 to 3999.
ipv6-prefix-name: Name of an IPv6 prefix list used to filter incoming routes, a case-sensitive string of
1 to 19 characters.
route-policy-name: Name of a routing policy used to filter incoming routes, a case-sensitive string of
1 to 63 characters.
335