HP FlexNetwork 3600 v2 Series Command Reference Manual page 215

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

Threshold: 75%
Minimum time between advertisement runs is 30 seconds
Optional capabilities:
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value: 0
BFD: Enabled
Routing policy configured:
No routing policy is configured
Table 45 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
BGP current event
BGP last state
Port
Configured: Active Hold Time
Keepalive Time
Received: Active Hold Time
Negotiated: Active Hold Time
Peer optional capabilities
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between advertisement runs
Optional capabilities
Description
IP address of the peer.
Local router ID.
Peer type.
BGP version.
Router ID of the peer.
Current state of the peer.
Current event of the peer.
Previous state of the peer.
TCP port numbers of the local router and its peer.
Local holdtime interval.
Local keepalive interval.
Remote holdtime interval.
Negotiated holdtime interval.
Optional capabilities supported by the peer,
including BGP multiprotocol extensions and route
refresh.
Routes are advertised and received in IPv4 unicasts.
Total numbers of received packets and updates.
Total numbers of sent packets and updates.
Maximum allowed prefix number.
Percentage of received prefixes from the peer group
to maximum prefixes allowed to receive from the
peer group; If the percentage is reached, the system
generates alarm messages.
Minimum route advertisement interval.
Optional capabilities enabled by the peer.
203

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents