HP FlexNetwork 3600 v2 Series Command Reference Manual page 152

View
Any view
Default level
1: Monitor level
Parameters
process-id: Displays the host name-to-system ID mapping table for the IS-IS process. The ID is in
the range of 1 to 65535.
vpn-instance vpn-instance-name: Displays the host name-to-system ID mapping table for the
MPLS L3VPN. vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is
specified, the host name-to-system ID mapping table for the public network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display isis name-table to display the host name-to-system ID mapping table.
Examples
# Configure a name for the local IS system.
<Sysname> system-view
[Sysname] isis 1
[Sysname-isis-1] is-name RUTA
# Configure a static mapping for the remote IS system (system ID 0000.0000.0041, host name
RUTB).
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name-to-system ID mapping table.
[Sysname-isis-1] display isis name-table
---------------------------------------------------------------
System ID
6789.0000.0001
0000.0000.0041
Table 34 Command output
Field
System ID
Hostname
Type
Name table information for ISIS(1)
Hostname
RUTA
RUTB
Description
System ID
Host name
Mapping type (static or dynamic)
140
Type
DYNAMIC
STATIC