Peer As-Path-Acl (Bgp/Bgp-Vpn Instance View); Peer Bfd - HP FlexNetwork 3600 v2 Series Command Reference Manual

peer as-path-acl (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import }
undo peer { group-name | ip-address } as-path-acl as-path-acl-number { export | import }
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
as-path-acl-number: AS path list number, in the range of 1 to 256.
export: Filters outgoing routes.
import: Filters incoming routes.
Description
Use peer as-path-acl to configure the filtering of routes incoming from or outgoing to a peer/peer
group based on a specified AS path list.
Use undo peer as-path-acl to remove the configuration.
By default, no AS path list filtering is configured.
Related commands: ip as-path, if-match as-path, and apply as-path.
Examples
# In BGP view, reference the AS path list 1 to filter routes outgoing to the peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test as-path-acl 1 export
# In BGP-VPN instance view, reference the AS path list 1 to filter routes outgoing to the peer group
test. (The VPN has been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test as-path-acl 1 export

peer bfd

Syntax
peer ip-address bfd
undo peer ip-address bfd
View
BGP view, BGP-VPN instance view
Default level
2: System level
231