Display Policy-Based-Route - HP FlexNetwork 3600 v2 Series Command Reference Manual

if-match acl 3101
apply ip-address next-hop 1.1.1.1
# Display the local PBR routing information.
<Sysname> display ip policy-based-route setup local
Local policy based routing configuration information:
policy-based-route: pr01
permit node 1:
if-match acl 3101
apply ip-address next-hop 1.1.1.1
Table 99 Command output
Field
policy Name
interface
Interface Vlan-interface11 policy based routing
configuration information
Local policy based routing configuration information
policy-based-route
permit node 1
if-match acl 3101
apply ip-address next-hop 1.1.1.1

display policy-based-route

Syntax
display policy-based-route [ policy-name ] [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
policy-name: Displays information about the specified policy. A policy name is a string of 1 to 19
characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display policy-based-route to display PBR policy information.
Description
Policy name.
Interface where the policy is applied. Local means
the policy is applied locally.
PBR routing information on Vlan-interface 11.
Local PBR information.
Policy name.
The match mode is permit, and the policy has a
node (node 1).
Match packets against ACL 3101.
The next hop address is 1.1.1.1.
442