HP FlexNetwork 3600 v2 Series Command Reference Manual page 216

Field
Route refresh capability has been enabled
ORF advertise capability based on prefix (type 64):
Local: both
Negotiated: send
Peer Preferred Value
BFD
Routing policy configured
# Display the log information of the peer 10.110.25.20.
<sysname> display bgp peer 10.110.25.20 log-info
Peer : 10.110.25.20
Date Time
10-Jul-2008 15:46:17 Down
10-Jul-2008 09:23:00 Up
10-Jul-2008 07:46:17 Down
10-Jul-2008 06:23:00 Up
10-Jul-2008 05:46:17 Down
Table 46 Command output
Field
Peer
Date
Time
State
Notification
Error/SubError
State Notification
Error/SubError
Send Notification with Error 1/1
Message Header Error/Connection Not Synchronized
Receive Notification with Error 3/2
UPDATE Message Error/Unsupported optional Parameter
Send Notification with Error 6/4
Cease/Administrative Reset
204
Description
The route-refresh capability has been enabled.
The BGP peer supports the ORF capability based on
IP prefix. The capability value is 64.
The local BGP router supports both the ORF sending
and receiving capabilities.
Negotiation result: The local BGP router can send
Router-refresh messages carrying the ORF
information, and the peer can receive Router-refresh
messages carrying the ORF information. (This field
is not displayed if neither the send nor the receive
capability is supported.)
Preferred value specified for the routes from the
peer.
BFD state: enabled or disabled.
Local routing policy.
Description
IP address of the peer.
Date on which the Notification was sent or received.
Time at which the Notification was sent or received.
BGP session state, which can be:
•
Up—Indicates the BGP session is up.
•
Down—Indicates the BGP session is down.
Notification message.
•
Error—Refers to the error code, which
identifies the type of the Notification.
•
SubError—Refers to the error subcode of the