Display Rip Interface - HP FlexNetwork 3600 v2 Series Command Reference Manual

display rip interface

Syntax
display rip process-id interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535.
interface-type interface-number: Specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rip interface to display the RIP interface information of the RIP process.
If no interface is specified, information about all RIP interfaces of the RIP process is displayed.
Examples
# Display all the interface information of RIP process 1.
<Sysname> display rip 1 interface
Interface-name: Vlan-interface11
Address/Mask:1.1.1.1/24
MetricIn:5
MetricOut:5
Split-horizon/Poison-reverse:on/off
Default route:off
Current packets number/Maximum packets number:234/2000
Table 9 Command output
Field
Interface-name
Address/Mask
Version
MetricIn
MetricIn route policy
Version:RIPv1
MetricIn route policy:123
MetricOut route policy:234
Input/Output:on/on
Description
The name of an interface running RIP.
IP address and mask of the interface.
RIP version running on the interface.
Additional routing metric added to the incoming
routes.
Name of the routing policy used to add the additional
routing metric for the incoming routes. If no routing
policy is referenced, the field displays Not
34