Peer Bfd (Ipv6 Address Family View/Ipv6 Bgp-Vpn Instance View); Peer Capability-Advertise Orf - HP FlexNetwork 3600 v2 Series Command Reference Manual

peer bfd (IPv6 address family view/IPv6 BGP-VPN instance
view)
Syntax
peer ipv6-address bfd
undo peer ipv6-address bfd
View
IPv6 address family view, IPv6 BGP-VPN instance view
Default level
2: System level
Parameters
ipv6-address: IPv6 address of a peer.
Description
Use peer bfd to enable BFD over the link to a BGP peer.
Use undo peer bfd to restore the default.
By default, BFD is not enabled for any BGP peer.
After a link failure occurs, BFD may detect the failure before the system performs GR, and as a result,
GR will fail. Therefore, if GR capability is enabled for IPv6 BGP, use BFD with caution.
Examples
# Enable BFD over the link to BGP peer 100::1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] ipv6-family
[Sysname-bgp-af-ipv6] peer 100::1 bfd

peer capability-advertise orf

Syntax
peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both |
receive | send }
undo peer { group-name | ip-address | ipv6-address } capability-advertise orf ipv6-prefix { both |
receive | send }
View
IPv6 address family view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
ipv6-address: IPv6 address of a peer.
both: Supports sending and receiving route-refresh messages carrying the ORF information.
379