Ip Vpn-Instance - HP FlexNetwork 3600 v2 Series Command Reference Manual

ip vpn-instance

Syntax
ip vpn-instance vpn-instance-name
undo ip vpn-instance vpn-instance-name
View
System view
Default level
2: System level
Parameters
vpn-instance-name: Name of the VPN instance, a case-insensitive string of 1 to 31 characters.
Description
Use ip vpn-instance to create a VPN instance and enter VPN instance view.
Use undo ip vpn-instance to delete a VPN instance.
A VPN instance takes effect only after you configure an RD for it.
Related command: route-distinguisher.
Examples
# Create a VPN instance named vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1]
ipv4-family
Syntax
ipv4-family
undo ipv4-family
Views
VPN instance view
Default level
2: System level
Parameters
None
Description
Use ipv4-family to enter IPv4 VPN view.
Use undo ipv4-family to remove all configurations performed in IPv4 VPN view.
Examples
# Enter IPv4 VPN view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] ipv4-family
465