Display Rip - HP FlexNetwork 3600 v2 Series Command Reference Manual

display rip

Syntax
display rip [ process-id | vpn-instance vpn-instance-name ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
process-id: RIP process ID, in the range of 1 to 65535. If no process ID is specified, information
about all configured RIP processes is displayed.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN. vpn-instance-name is a
case-sensitive string of 1 to 31 characters. If no VPN is specified, the information of the public
network is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rip to display the current status and configuration information of the specified RIP
process.
Examples
# Display the current status and configuration information of all configured RIP processes.
<Sysname> display rip
Public VPN-instance name :
RIP process : 1
RIP version : 1
Preference : 100
Checkzero : Enabled
Default-cost : 0
Summary : Enabled
Hostroutes : Enabled
Maximum number of balanced paths : 8
Update time
Suppress time :
update output delay :
TRIP retransmit time :
TRIP response packets retransmit count :
Silent interfaces : None
Default routes : Only
Verify-source : Enabled
: 30 sec(s) Timeout time
120 sec(s) Garbage-collect time :
20(ms) output count :
5 sec(s)
Default route cost : 3
31
: 180 sec(s)
120 sec(s)
3
36