Apply Tag - HP FlexNetwork 3600 v2 Series Command Reference Manual

View
Routing policy view
Default level
2: System level
Parameters
preferred-value: Preferred value, in the range of 0 to 65535.
Description
Use apply preferred-value to set a preferred value for BGP routes.
Use undo apply preferred-value to remove the clause configuration.
No preferred value is set for BGP routes by default.
Examples
# Configure node 10 in permit mode of routing policy policy1: Set a preferred value of 66 for BGP
routing information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply preferred-value 66

apply tag

Syntax
apply tag value
undo apply tag
View
Routing policy view
Default level
2: System level
Parameters
value: Tag value, in the range of 0 to 4294967295.
Description
Use apply tag to set a specified tag value for RIP, OSPF or IS-IS routing information.
Use undo apply tag to remove the clause configuration.
No routing tag is set for RIP, OSPF or IS-IS routing information by default.
Examples
# Configure node 10 in permit mode of routing policy policy1: set a tag of 100 for OSPF external
routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type external-type1
[Sysname-route-policy] apply tag 100
416