HP FlexNetwork 3600 v2 Series Command Reference Manual page 154

System Id: 1111.1111.1111
Interface: Vlan-interface11
State: Up HoldTime: 27s
Area Address(es):10
Peer IP Address(es): 3.1.1.2
Uptime: 00:38:15
Adj Protocol: IPV4
System Id: 1111.1111.1111
Interface: Vlan-interface11
State: Up HoldTime: 28s
Area Address(es):10
Peer IP Address(es): 3.1.1.2
Uptime: 00:38:15
Adj Protocol: IPV4
Table 35 Command output
Field
System Id
Interface
Circuit Id
State
HoldTime
Type
PRI
Area Address(es)
Peer IP Address(es)
Uptime
Adj Protocol
# Display IS-IS neighbor statistics.
<Sysname> display isis peer statistics
----------------------------
Type: L1(L1L2)
Type: L2(L1L2)
Description
System ID of the neighbor.
Interface connecting to the neighbor.
Circuit ID.
Circuit state.
Holdtime.
Within the holdtime if no hellos are received from the neighbor, the neighbor
is considered down. If a hello is received, the holdtime is reset to the initial
value.
Circuit type:
•
L1—Means the circuit type is Level-1 and the neighbor is a Level-1
router.
•
L2—Means the circuit type is Level-2 and the neighbor is a Level-2
router.
•
L1(L1L2)—Means the circuit type is Level-1 and the neighbor is a
Level-1-2 router.
•
L2(L1L2)—Means the circuit type is Level-2 and the neighbor is a
Level-1-2 router.
DIS priority of the neighbor.
The neighbor's area address.
IP address of the neighbor.
Time that elapsed since the neighbor relationship was formed.
Adjacency protocol.
Peer Statistics information for ISIS(1)
142
Circuit Id: 1111.1111.1112.01
PRI: 64
Circuit Id: 1111.1111.1112.01
PRI: 64