Enable Link-Local-Signaling; Enable Log - HP FlexNetwork 3600 v2 Series Command Reference Manual

<Sysname> system-view
[Sysname] ospf
[Sysname-ospf-1] dscp 63

enable link-local-signaling

Syntax
enable link-local-signaling
undo enable link-local-signaling
View
OSPF view
Default level
2: System level
Parameters
None
Description
Use enable link-local-signaling to enable the OSPF link-local signaling (LLC) capability.
Use undo enable link-local-signaling to disable the OSPF link-local signaling capability.
By default, this capability is disabled.
Examples
# Enable link-local signaling for OSPF process 1.
<Sysname> system-view
[Sysname] ospf 1
[Sysname-ospf-1] enable link-local-signaling

enable log

Syntax
enable log [ config | error | state ]
undo enable log [ config | error | state ]
View
OSPF view
Default level
2: System level
Parameters
config: Enables configuration logging.
error: Enables error logging.
state: Enables state logging.
Description
Use enable log to enable specified OSPF logging.
Use undo enable log to disable specified OSPF logging.
89