HP FlexNetwork 3600 v2 Series Command Reference Manual page 48

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display rip route to display the routing information of a specified RIP process.
Examples
# Display all routing information of RIP process 1.
<Sysname> display rip 1 route
Route Flags: R - RIP, T - TRIP
----------------------------------------------------------------------------
Peer 111.1.1.2
Destination/Mask
122.0.0.0/8
Table 10 Command output
Field
Route Flags
Peer 21.0.0.23 on Vlan-interface11
Destination/Mask
Nexthop
Cost
Tag
Flags
Sec
# Display the routing statistics of RIP process 1.
<Sysname> display rip 1 route statistics
Peer
111.1.1.2
Total
Table 11 Command output
Field
Peer
Aging
Permanent
Garbage
Total
P - Permanent, A - Aging, S - Suppressed, G - Garbage-collect
on Vlan-interface11
Nexthop
111.1.1.2
Aging Permanent
1 0
1 0
Description
IP address of a neighbor
Total number of aging routes learned from the specified neighbor
Total number of permanent routes learned from the specified neighbor
Total number of routes in Garbage-collection state learned from the specified neighbor
Total number of routes learned from all RIP neighbors
Cost Tag Flags
1 0
Description
•
R—RIP route.
•
T—TRIP route.
•
P—The route never expires.
•
A— he route is aging.
•
S—The route is suppressed.
•
G— he route is in Garbage-collect state.
Routing information learned on a RIP interface from the
specified neighbor.
Destination IP address and subnet mask.
Next hop of the route.
Cost of the route.
Route tag.
Indicates the route state.
Remaining time of the timer corresponding to the route
state.
Garbage
0
0
36
Sec
RA 22