Ipv6 Mce Configuration Commands - HP FlexNetwork 3600 v2 Series Command Reference Manual

IPv6 MCE configuration commands

This chapter describes only the commands related to the IPv6 MCE feature. For information about
the routing protocol configuration commands in the configuration examples, see Layer 3—IP Routing
Command Reference.
display bgp vpnv6 vpn-instance peer
Syntax
display bgp vpnv6 vpn-instance vpn-instance-name peer [ ipv6-address verbose | verbose ] [ |
{ begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor
Parameters
vpn-instance-name: Name of a VPN instance, a case-sensitive string of 1 to 31 characters.
ipv6-address: IPv6 address of a peer.
verbose: Displays the detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display bgp vpnv6 vpn-instance peer to display information about the IPv6 BGP peers in the
specified VPN instance.
If you do not specify any optional parameters, the command displays the brief information of all IPv6
BGP peers.
Examples
# Display brief information about the IPv6 BGP peers in the VPN instance vpn1.
<Sysname> display bgp vpnv6 vpn-instance vpn1 peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer
2001::1
Peers in established state : 1
AS MsgRcvd MsgSent OutQ PrefRcv Up/Down
200 4
473
6 0 2 00:00:09 Established
State