Ospf - HP FlexNetwork 3600 v2 Series Command Reference Manual

Description
Use opaque-capability enable to enable opaque LSA advertisement and reception. With the
command configured, the OSPF device can receive and advertise the Type-9, Type-10 and Type-11
opaque LSAs.
Use the undo opaque-capability command to restore the default.
The feature is disabled by default.
Examples
# Enable advertising and receiving opaque LSAs.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] opaque-capability enable

ospf

Syntax
ospf [ process-id | router-id router-id | vpn-instance vpn- instance-name ] *
undo ospf [ process-id ]
View
System view
Default level
2: System level
Parameters
process-id: OSPF process ID, in the range of 1 to 65535.
router-id router-id: OSPF Router ID, in dotted decimal format.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN that the OSPF process belongs to.
vpn-instance-name is a case-sensitive string of 1 to 31 characters. If no VPN is specified, the OSPF
process belongs to the public network.
Description
Use ospf to enable an OSPF process.
Use undo ospf to disable an OSPF process.
No OSPF process is enabled by default.
You can enable multiple OSPF processes on a router and specify different Router IDs for these
processes.
Enabling OSPF first is required before performing other tasks.
Examples
# Enable OSPF process 100 and specify Router ID 10.10.10.1.
<Sysname> system-view
[Sysname] ospf 100 router-id 10.10.10.1
[Sysname-ospf-100]
105