HP FlexNetwork 3600 v2 Series Command Reference Manual page 464

No routing policy is configured
Table 105 Command output
Field
Peer
Local
Type
BGP version
remote router ID
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol
extended
Peer support bgp route refresh
capability
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Minimum time between advertisement
runs
Optional capabilities
Local
Negotiated
Description
IP address of the peer
IP address of the local router
BGP type
Version of BGP that the peer runs
Router ID of the remote router
Current status of the BGP session
Duration since the peer is established
Current event of the BGP session
State that the BGP session was in before transitioning to the
current status
Local and remote ports of the BGP session
Settings of the local timers, including the active hold interval and
keepalive interval
Received active hold interval
Negotiated active hold interval and keepalive time
Optional capabilities of the peer
The peer supports multiprotocol extension.
The peer supports route refresh capability.
IPv4 unicast family capability
Total number of received messages and the number of received
update messages
Total number of sent messages and the number of sent update
messages
Maximum number of routes that the VPN instance supports
Threshold value
Minimum route advertisement interval
Local optional capabilities
Indicates whether the local device supports sending and receiving
Route-refresh packets with the ORF information. The value can
be:
•
both—Supports sending and receiving Route-refresh
messages with the ORF information.
•
send—Supports sending Route-refresh messages with the
ORF information.
•
receive—Supports receiving Route-refresh messages with
the ORF information.
ORF capability negotiated by the local and remote peers. The
value can be:
452