Peer Route-Limit (Bgp/Bgp-Vpn Instance View) - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Description
Use peer reflect-client to configure the router as a route reflector and specify a peer/peer group as
a client.
Use undo peer reflect-client to remove the configuration.
By default, neither the route reflector nor the client is configured.
Related commands: reflect between-clients and reflect cluster-id.
Examples
# In BGP view, configure the local device as a route reflector and specify the IBGP peer group test as
a client.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer test reflect-client
# In BGP-VPN instance view, configure the local device as a route reflector and specify the IBGP
peer group test as a client. (vpn1 must have been created.)
<Sysname> system-view
[Sysname] bgp 109
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer test reflect-client

peer route-limit (BGP/BGP-VPN instance view)

Syntax
peer { group-name | ip-address } route-limit prefix-number [ { alert-only | reconnect
reconnect-time } | percentage-value ] *
undo peer { group-name | ip-address } route-limit
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
prefix-number: Number of prefixes that can be received from the peer or peer group. Its range varies
with devices. If the number of prefixes received from the peer/peer group reaches the prefix-number,
the router will tear down the connection to the peer/peer group.
alert-only: If the number of prefixes received from the peer/peer group reaches the prefix-number,
the router will not tear down the connection to the peer/peer group but display an alarm message.
reconnect reconnect-time: Specifies a reconnect time, after which, the router will re-establish a
connection to the peer/peer group. It has no default value and is in the range of 1 to 65535 seconds.
250

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents