Refresh Bgp Ipv6; Reset Bgp Ipv6 - HP FlexNetwork 3600 v2 Series Command Reference Manual

refresh bgp ipv6

Syntax
refresh bgp ipv6 { ipv4-address | ipv6-address | all | external | group group-name | internal }
{ export | import }
View
User view
Default level
1: Monitor level
Parameters
ipv4-address: Soft-resets the connection with an IPv4 BGP peer.
ipv6-address: Soft-resets the connection with an IPv6 BGP peer.
all: Soft-resets all IPv6 BGP connections.
external: Soft-resets EBGP connections.
group ipv6-group-name: Soft-resets connections with a peer group. The name of the peer group is a
string of 1 to 47 characters.
internal: Soft-resets IBGP connections.
export: Performs soft reset in outbound direction.
import: Performs soft reset in inbound direction.
Description
Use refresh bgp ipv6 to soft reset specified IPv4/IPv6 BGP connections. With this feature, you can
refresh the IPv4/IPv6 BGP routing table and apply a new available policy without tearing down BGP
connections.
To perform IPv4/IPv6 BGP soft reset, all routers in the network should support route-refresh. If a
router not supporting route refresh exists in the network, you need to use the peer keep-all-routes
command on the local router to save all route updates before performing soft reset.
Examples
# Soft reset inbound IPv6 BGP connections.
<Sysname> refresh bgp ipv6 all import

reset bgp ipv6

Syntax
reset bgp ipv6 { as-number | ipv4-address | ipv6-address | all | external | group group-name |
internal }
View
User view
Default level
2: System level
Parameters
as-number: Resets the IPv6 BGP connections to peers in the specified AS. The AS number is in the
range of 1 to 4294967295.
404