Peer Capability-Advertise Orf Non-Standard - HP FlexNetwork 3600 v2 Series Command Reference Manual

Hide thumbs Also See for FlexNetwork 3600 v2 Series:
Table of Contents

Advertisement

[Sysname-bgp] peer 18.10.0.9 capability-advertise orf ip-prefix both
The related configuration needs to be made on the peer.
# In BGP-VPN instance view, enable the ORF capability for the BGP peer 18.10.0.9. Then, after
negotiation, the local router can exchange ORF information with the peer 18.10.0.9. (vpn1 must
have been created.)
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpn-instance vpn1
[Sysname-bgp-ipv4-vpn1] peer 18.10.0.9 as-number 200
[Sysname-bgp-ipv4-vpn1] peer 18.10.0.9 capability-advertise orf ip-prefix both
The related configuration needs to be made on the peer.

peer capability-advertise orf non-standard

Syntax
peer { group-name | ip-address } capability-advertise orf non-standard
undo peer { group-name | ip-address } capability-advertise orf non-standard
View
BGP view, BGP-VPN instance view
Default level
2: System level
Parameters
group-name: Name of a peer group, a string of 1 to 47 characters.
ip-address: IP address of a peer.
Parameters
Use peer capability-advertise orf non-standard to enable the non-standard ORF capability (the
early implementation of ORF is different from that defined in RFC) for a BGP peer or peer group.
Use undo peer capability-advertise orf non-standard to disable the non-standard ORF capability
for the BGP peer or peer group.
By default, the non-standard ORF capability is not enabled for a BGP peer or peer group.
This command needs to be configured when the peer supports only non-standard ORF.
Related commands: peer capability-advertise orf.
Examples
# Enable the non-standard ORF capability for the BGP peer 18.10.0.9 (suppose the BGP peer
18.10.0.9 can only send non-standard ORF packets).
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] peer 18.10.0.9 as-number 100
[Sysname-bgp] peer 18.10.0.9 capability-advertise orf non-standard
[Sysname-bgp] peer 18.10.0.9 capability-advertise orf ip-prefix both
# In BGP-VPN instance view, enable the non-standard ORF capability for the BGP peer 18.10.0.9
(suppose the BGP peer 18.10.0.9 can only send non-standard ORF packets). (vpn1 must have been
created.)
<Sysname> system-view
234

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents