Rip Split-Horizon; Rip Summary-Address - HP FlexNetwork 3600 v2 Series Command Reference Manual

Use undo rip poison-reverse to disable the poison reverse function.
By default, the poison reverse function is disabled.
Examples
# Enable the poison reverse function for RIP routing updates on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip poison-reverse

rip split-horizon

Syntax
rip split-horizon
undo rip split-horizon
View
Interface view
Default level
2: System level
Parameters
None
Description
Use rip split-horizon to enable the split horizon function.
Use undo rip split-horizon to disable the split horizon function.
The split horizon function is enabled by default.
The split horizon function is necessary for preventing routing loops. To disable it in special cases,
make sure it is necessary.
Only the poison reverse function takes effect if both the split horizon and poison reverse functions
are enabled.
Examples
# Enable the split horizon function on VLAN-interface 10.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] rip split-horizon

rip summary-address

Syntax
rip summary-address ip-address { mask | mask-length }
undo rip summary-address ip-address { mask | mask-length }
View
Interface view
Default level
2: System level
53